Spokane Valley Hot Tub Repair Pros
27 S McDonald Rd
Spokane Valley, WA 99216, United States
MQ4C+FR Spokane Valley, Washington, USA
(509) 331-7524
https://hottubrepairspokanewa.com/hot-tub-repair-spokane-valley-wa/
Spa Repair Spokane Valley
If you care for the pool, it is possible that you could have to fix a leak at some moment. The tub isn’t likely to leak, but it’s possible for it to do so. There are many parts of the tub which could cause leaks, including the manifold for the heater assembly, the seal on the wet end of the pump and jet bodies as well as the PVC plumbing components and tubing, slice gates and slice valves and other tub components. The first thing you should do if your hot tub is suffering from leaks is to address the issue.
Problems with water leaks and discoloration are most common within filter housings. The most common cause of discoloration is in hot tubs that have leaks water that isn’t clear, making the tub look bad. You can damage the tub in the event that you do nothing about a leak in the home but you shouldn’t do it in the form of discoloration.
Discoloration of the filter housing is a normal event that there isn’t much you can do about right now. You’ll only know of the fact that it’s happening. As time passes, it will be brittle and easy to break, and it will not last very long. As long as it doesn’t cause any problems and isn’t in the spotlight, don’t even consider it.
Everything, even the housing won’t be hurt by this coloration. It’s just natural discoloration over a period of more than 10 years of use. So long as it’s functioning, you don’t have to be concerned about it.
What can you do to fix a filter housing leak in the spa?
If you don’t know what to do, a leak in your hot tub’s plumbing can be extremely painful. The best solution is call an expert in tub repair.
If there’s a leak between the housing for the filter and the tub shell, the best way to prevent it from happening is take out a portion of the water in the tub to ensure it’s below the filter. Some good silicone sealants can help you seal all of the gaps between the tub shell and your filter housing. You can also caulk all of them.
Be sure to press the sealant into the gaps using your fingers or caulking tool to get an even penetration. Let it dry for a bit before filling them in. Filter housing leaks could cause a plumbing leak or cause damage to the housing if you try to remove it and so be cautious when you do this. That’s why you need to be attentive.
Take care not to put too much stress on the filter housing system. When there is an excessive amount of stress it is possible that the o-ring is pushed into the filter housing system. A big pair of channel locks and a strap wrench will be able to get the job completed. But you don’t want to break the filter head if it isn’t your intention to go too slow. Take your time when you do things.
